Connection of combustible gas probe and control cabinet
Since combustible gas alarms are safe products, many places have carried out mandatory installation and inspection of combustible gas alarms, requiring that combustible gas alarms with composite explosion-proof specifications be installed in public places, petrochemical and other environments where flammable gases are present. However, many customers do not know how to properly install combustible gas alarms. The following are standard specifications for installation details.
1.According to the use environment, select the specific flammable gas that is mainly detected because the gas sensor of the core component of the flammable gas alarm needs to be calibrated according to industry regulations as the main basis for the detection. This is closely related to the flammable gas for specific inspection, such as methane. The types of flammable gases such as toluene, methanol, ethylene oxide, gasoline, kerosene, and jet fuel are different, and there are certain differences in the detection standards, which is also the basis for safeguarding safety inspections.
2.According to the specific environment, the design of the combustible gas alarm system design program, the need to consider the gas pipeline coverage to select the installation point, the proportion of flammable gas and air to select the installation location, the specific area of the environment to be determined to determine the number of combustible gas detectors And gas alarm controller host selection.
3.After the preliminary work is completed, it is necessary to install a combustible gas alarm. We can provide telephone guidance or video guidance, because the installation of combustible gas alarms does not have any technical content. It is only necessary to know the positive and negative electrodes to connect the combustible gas detector and gas. Alarm controller host.